AHTAPOT Sheet Metal Angle Bracket 6-Piece 1.5X13X60x60 mm (100 Pieces)

No. 6 Steel Corner Brace – 1.5 × 13 × 60 × 60 mm, Box of 100

No. 6 Steel Corner Braces are practical, durable reinforcement brackets widely used for standard corner joints. With a 1.5 mm thickness, 13 mm width, and equal 60 × 60 mm arm lengths, they provide the ideal solution in confined spaces where strength is still required. The 90° right‑angle profile suits internal furniture corners, frame assemblies, and small‑to‑medium timberwork. Supplied in boxes of 100, they offer cost‑effective stock for workshops and mass‑production.

Technical Specifications

• Type: No. 6 Steel Corner Brace — Standard Corner Connection Bracket
• Thickness: 1.5 mm
• Width: 13 mm
• Arm Size: 60 mm × 60 mm (equal‑sided)
• Material: High‑Quality Metal Alloy
• Finish: Zinc‑Plated — Corrosion & Rust‑Resistant
• Hole Diameter: Approx. 4–5 mm (standard screw fit)
• Number of Holes: 4 — 2 per arm
• Angle: 90° standard right angle
• Colour: Silver / Zinc
• Pack Quantity: 100 per Box

Applications

• Internal corner joints in furniture carcasses
• Corner reinforcement for cabinets, bedside units, shelves, and drawers
• Corner connections for timber frames, doors, and joinery
• Corner points on plywood, particleboard, and MDF panels
• Corners for interior partition walls and light‑duty support systems
• Repair of weakened corners during renovation
• Custom‑built and standard furniture manufacture
• Mass‑production and small‑to‑medium‑scale projects

Product Advantages

• Standard 60 × 60 mm Size: The most widely used corner brace dimension; fits perfectly with most furniture and frame systems
• Narrow 13 mm Width: Fits easily into tight, confined internal corners; remains hidden from view for a clean, neat appearance
• 1.5 mm Thickness: Sufficient rigidity for light‑to‑medium‑duty use; will not bend, warp, or permanently deform
• Four‑Point Security: Two fixing points on each arm; rotation, slip, and loosening over time are minimised — the joint stays secure for years
• Zinc‑Plated Finish: Rust‑resistant indoors; no discolouration, maintains a professional look
• Precision 90° Angle: Factory‑set angle; no on‑site adjustment needed — corners form perfectly square
• Simple Installation: No special tools; pre‑aligned holes ready for fitting
• Economical 100‑Pack: Ideal quantity for high‑volume workshops; low unit cost helps keep project expenses down

Installation Guidelines

• Ensure corner surfaces are flat, clean, and perfectly square to one another
• Mark the brace position; check both arms sit flush and evenly
• Select suitable fasteners: use wood screws with 4 mm head diameter; match screw size to the hole diameter
• Tighten progressively in a crossing pattern; do not fully tighten until all screws are seated
• Avoid over‑tightening — material may split or the brace may distort
• For heavier loads, install symmetrically on both sides; single‑sided fitting creates imbalance
• Use stainless‑steel screws in damp locations such as kitchens and bathrooms
• Loosen screws gradually in a cross pattern during disassembly; do not force the joint apart

Frequently Asked Questions

How does this differ from other numbered models?
Larger options include No. 8 (80 × 80 mm) and No. 10 (100 × 100 mm); No. 6 is the most compact standard size at 60 × 60 mm — the first choice for tight spaces.

What weight can it support?
The 1.5 mm thickness and narrow width are designed for light‑to‑medium‑duty applications. Wider, heavier‑gauge models are recommended for sustained heavy loads.

Will it rust?
Zinc plating provides adequate protection for indoor use. For exterior or persistently damp environments, the stainless‑steel version is recommended.

Are other sizes available?
Yes — options include 40 × 40 mm, 50 × 50 mm, 70 × 70 mm, 80 × 80 mm, and 100 × 100 mm.

Are screws included?
No — braces only. Purchase fixings separately, matched to your material type.