Beşel Spring Hinge Satin No:29 (30 Pairs)

Beşel Spring Hinge Satin No. 29 — 30 Pairs

Beşel Satin Spring Hinge No. 29 is a practical, neatly proportioned fitting designed for confined spaces; its integrated spring mechanism ensures doors close automatically when released. The refined satin finish complements modern cabinet and furniture designs, while the bulk carton of 30 pairs delivers excellent unit‑cost efficiency and stock coverage for workshops, serial production, and large renovation projects.

Technical Specifications

• Brand: Beşel
• Model: Spring Hinge No. 29
• Finish: Satin / Matte Nickel — textured low‑sheen surface, fingerprint‑resistant and scratch‑proof
• Dimensions: 64 × 42 mm — compact standard size
• Opening Angle: 90°
• Action: Fully integrated spring — door self‑closes from any open position
• Material: High‑quality cold‑formed steel
• Mounting: Surface‑fit, screw‑down from above
• Hole Spacing: Standard centres — widely compatible, direct replacement for many existing hinges
• Pack: 30 Pairs (60 Pieces) per carton

Applications

• Narrow‑stile kitchen cabinets, bathroom doors, and bedside units
• Bookshelves, compact storage, and slim shelving systems
• Drawer fronts, partition panels, and small furniture doors
• Office filing cabinets, under‑counter units, and display cases
• Cafés, restaurants, and commercial premises — frequently used small doors
• Refurbishment projects — direct swap for existing No. 29 hinges without new drilling

Product Advantages

• Automatic Closure: Spring pulls the door shut even if left open — prevents dust ingress and accidental impact damage
• Compact Footprint: Smaller outer dimensions suit narrow door edges and slim cabinet fronts where larger hinges will not fit
• Understated Satin Finish: Smoother, less reflective than bright plating; fingerprints and smudges are far less visible and easy to wipe clean
• Proven Durability: Beşel‑built spring mechanism maintains consistent closing force through thousands of cycles with no fatigue
• Easy Replacement: The widely used No. 29 pattern fits most older cabinets; swap out without re‑drilling in most cases
• Cost‑Effective Pack: 30 pairs = 60 hinges — enough for approx. 30 doors; lowers unit price and simplifies stock management

Installation & Usage Guidelines

• Position hinge 8–10 mm in from the door edge; mark and drill pilot holes
• Fit 2 hinges per standard door — one near the top, one near the bottom; add a third centrally for doors taller than 80 cm to prevent sagging
• Choose screw length to match door thickness — do not allow screws to pierce through the opposite face
• Fit screws loosely first; close door and check alignment before tightening fully
• Spring tension is factory‑set — no external adjustment. Use extra hinges for heavier doors to ensure reliable closure

Frequently Asked Questions

1. What is the difference between No. 29 and No. 33?
No. 29 is smaller and more compact, designed specifically for slim doors and narrow edges. No. 33 is larger and suits wider, heavier doors. They are not interchangeable — compare dimensions before ordering as a replacement.

2. Can I adjust the spring strength?
There is no external adjustment screw on this model; tension is factory‑calibrated. Fit the correct number of hinges for the door weight and it will close reliably.

3. Can these be used outdoors?
Manufactured for interior use only. For external doors exposed to rain, moisture, and weather, select stainless‑steel or exterior‑grade protected hinges.

4. What does “30 pairs” mean?
Each door requires 2 hinges, so 30 pairs gives you 60 hinges total — sufficient for hanging approximately 30 doors.

5. Will they tarnish or rust?
The satin nickel finish provides long‑life protection in normal indoor conditions. Wipe dry regularly in areas subject to splashes or persistent dampness.