Dekor 1532 Aluminum Float with Handle 7x29 cm (12 Pieces)

Dekor 1532 Aluminium Screed with Spacers — 7×29 cm – 12 Pieces

Dekor 1532 Spacer‑Type Aluminium Screed is a professionally engineered construction tool that both spreads and levels material during screed, plaster, and self‑levelling floor applications. With a 7 cm profile height and 29 cm working width, its evenly spaced bottom spacers divide thick mortar layers into uniform sections, removing excess material as it travels to ensure consistent thickness across the surface. Supplied as 12 pieces per carton.

Product Information

Features & Benefits

• Spacer Design: Distinctive spaced base performs two jobs at once — spreads material and sets thickness automatically, stripping away excess. Fills and levels in a single pass to save time
• 7 cm Deep Profile: Heavier section than standard flat screeds; rigid and unbending even in thick screed layers for precise control
• 29 cm Working Width: Perfectly sized for bathrooms, kitchens, corridors, and patch repairs; easily fits narrow openings and manoeuvres freely
• One‑Piece Aluminium: No joints, no undulation in use; approx. 60 % lighter than steel equivalents, rust‑proof and corrosion‑resistant
• Integral Spacers: Not detachable or bolted on — cast as a single unit with the main body; cannot loosen, detach, or work loose for long service life
• Dual‑Direction Action: Pushing forward — spacers gauge and separate material; pulling back — straight edge closes and finishes the surface. Distribute and refine in one continuous motion
• Carton of 12: Cost‑effective bulk supply for site crews, renovation contractors, and multi‑team operations

Application Areas

• Screeding: Even thickness distribution across coarse, fine, and dry‑mix floor screeds
• Self‑Levelling Floors: Preliminary spreading to divide material evenly and prevent pooling or mounding
• Heated Floors: Controls depth when screeding over pipework — spreads material without contacting or damaging pipes
• Confined Spaces: Bathrooms, toilets, balconies, corridor ends, and under furniture — where wider screeds cannot reach
• Repair & Refurbishment: Localised floor fixes, partial screed replacement, and small‑area patch work
• Wet‑Area Preparation: Ensures uniform screed depth prior to laying ceramic tiles, stone, and floor finishes

Usage & Maintenance Guidelines

• Rinse immediately before and after use; remove cement and mortar from between the spacers — hardened residue alters working height
• Do not drop — bent profile or damaged spacers prevent even distribution
• Hold at a slight angle while moving forward; vertical lifting pushes material, gentle angling creates smooth spread
• Store flat on a level surface or hang vertically; do not rest weight directly upon the spacers
• Worn spacer tips may be professionally trued; replace the unit if wear becomes excessive
• Keep dry and shaded; prolonged damp exposure may cause surface discolouration

Spacer vs. Flat Screed — Key Difference

• Spacer Screed (1532): Distributes and sets depth simultaneously; removes surplus and prevents build‑up. Preferred for heated floors and thick layers
• Flat Screed (1529 / 1531): Levels material already in place; used for the final smoothing pass
• Best used together in sequence: First 1532 Spacer Screed to lay and gauge, then flat screed to finish

Related & Compatible Products

• Dekor 1529 Aluminium Screed 4.5×27 cm: Flat model for final finishing
• Dekor 1530 Mortar Spreader 10×80 cm: Initial placement and spreading of material
• Dekor 1531 Extension‑Handle Screed 4.5×110 cm: Poled version for larger areas
• Dekor Levelling Rule: Overall thickness verification across larger rooms

Frequently Asked Questions

How tall are the spacers — what depth do they suit?
Optimised for standard screed depths of 4–6 cm; different spacer heights are available for thinner or thicker applications.

Can a handle be fitted?
Designed primarily for hand‑held use; accepts a short grip — the 1531 is recommended for long‑reach pole operation.

Will it damage underfloor heating pipes?
The profile never touches the pipes — spacers maintain safe clearance; it is the preferred tool for pipe‑over screeding.

Are other widths available?
Spacer screeds manufactured in 27–30 cm, 50 cm, and 80 cm; 29 cm is the most compact for tight spaces.

Can I buy a single unit?
Factory supply is cartons of 12; individual units may be found at retail outlets.

Can spacers be replaced if broken?
Cast integrally with the body — no separate spare parts. Replacement is recommended if spacers wear or break; with regular cleaning and care the unit will not deform for years.