Dekor 1702 Aluminum Interior Plaster Rod 2 m (1 Piece)

Dekor 1702 Aluminium Internal Rendering Rule — 2 m – 1 Piece

Dekor 1702 Aluminium Internal Rendering Rule is a lightweight, rigid levelling tool with a 2‑metre profile, engineered to produce true, even, and smooth surfaces during interior plaster, gypsum, and finishing work. Its one‑piece seamless construction resists bending and flexure, retaining factory precision year after year. Supplied as 1 piece per unit.

Product Information

Features & Benefits

• 2 m Length for Standard Interiors: True straightness across a full 2‑metre run in one pass — the ideal size for average‑width rooms, halls, corridors, and apartment sections. Easy to carry and highly manoeuvrable
• Interior‑Optimised Profile: Lighter section than exterior rules; minimal arm fatigue when held overhead yet rigid enough to stay perfectly straight
• One‑Piece Seamless Build: Zero joints; no thickness variation or undulation as the rule is drawn — guaranteeing consistent evenness wall‑to‑wall
• Anodised Protection: Resists gypsum, cement, and lime deposits; cleans easily, does not stain, and will not rust or corrode
• Dual‑Edge Service: Both working edges are fully usable — flip the rule over for extended service life when one side wears
• Versatile Grip Compatibility: Standard pull grips fit both ends; works comfortably alone, or faster as a two‑person team
• Effortless Transport & Storage: Fits easily inside standard vehicles; convenient to move between sites, apartments, and renovation locations

Application Areas

• Standard‑Width Interiors: Gypsum and sand‑cement plaster in rooms, halls, kitchens, and corridors
• Gypsum & Finishing Coats: Achieving a flawless smooth finish with thin‑layer gypsum, filler, and ready‑mixed skim coats
• Ceilings & High Zones: Levelling control at standard ceiling heights, beneath cornices, and along wall–ceiling lines
• Screed & Floors: Levelling screeds in medium‑sized rooms, balconies, and connecting passageways
• Repair & Refurbishment: Apartment maintenance, partial plaster repairs, and full‑room makeovers
• Serial Projects: Fast, consistent finishing across housing stock, developments, and apartment blocks

Internal vs External Rule — Key Differences

• Internal Rule (1702): Lightweight optimised profile; excellent results indoors, easy to handle, cost‑effective. Not designed for prolonged outdoor exposure.
• External Rule (1706): Thicker, wider section; engineered to resist wind, rain, sun, and temperature variation — correspondingly heavier.
• Both share identical nominal lengths but differ in profile depth and weight; an external rule can be used indoors but adds unnecessary fatigue.

Usage & Maintenance Guidelines

• Rinse with water before and after use to remove gypsum, cement, and mortar residues immediately; hardened material compromises edge straightness
• Do not drop onto hard surfaces; a bent profile will not pull true
• Store flat on a level base or hang vertically; avoid leaving suspended from one end for extended periods
• Dress lightly worn edges with fine abrasive or a file as needed
• If fitting an extension handle or pull grip, ensure connection points seat fully and securely
• Keep indoors in a dry, shaded location; do not leave outside — interior sections degrade gradually under weather exposure

Related & Compatible Products

• Dekor 1703 Aluminium Internal Rendering Rule 2.5 m: For more spacious interiors
• Dekor 1701 Aluminium Internal Rendering Rule 1.5 m: Confined spaces, bathrooms, kitchens
• Dekor 1704 Aluminium Internal Rendering Rule 3 m: For large halls and open‑plan areas
• Dekor Render Rule Pull Grip: Fits both ends for balanced two‑person operation

Frequently Asked Questions

Can the 2 m internal rule be used externally?
Not recommended. The interior profile is not engineered for outdoor exposure; prolonged wind, rain, and sun may cause warping. Choose Dekor 1706 for exterior facades.

Is the 2 m length jointed or solid?
Solid one‑piece extrusion with no joins; easy to transport and store, fitting comfortably inside standard vehicles.

Can one person use it?
Yes — its balanced weight makes single‑hand operation straightforward; fitting dual grips allows two‑person working for even greater efficiency.

Will grips from other brands fit?
Manufactured to general standards; Dekor‑branded grips are recommended for guaranteed fit and trouble‑free operation.

Can it be straightened if bent?
It may be realigned, but will not fully recover original precision once deformed; avoiding impacts is essential.

Does it come as a single unit?
Yes — supplied as 1 piece per package; bulk order quantities may be specified when ordering multiple units.