L-Shaped Table Bracket 2X86X77x77 Mm (100 Pieces)

L‑Shaped Table Bracket – 2×86×77×77 mm, Zinc‑Plated, Pack of 100

The L‑Shaped Table Bracket is a heavy‑duty corner connection fitting. Its distinct L‑profile links leg to table base at the corner, delivering unshakable rigidity even for large, heavy furniture thanks to a broad mounting surface. Manufactured at 2 mm thick with an 86 mm main arm and a 77×77 mm mounting face. Zinc‑plated finish provides long‑lasting protection against rust and corrosion. Priced per box of 100 units, it offers an economical solution for serial production and large‑scale projects.

Technical Specifications

• Product Type: L‑Shaped Table Bracket
• Thickness: 2 mm
• Main Arm Length: 86 mm
• Mounting Face: 77×77 mm
• Profile: L‑shaped, corner connection
• Material: High‑Quality Steel
• Finish: Zinc‑Plated
• Colour: Silver
• Installation: Screw‑Fixed
• Compatibility: Large square legs — 60×60 mm, 70×70 mm, 75×75 mm
• Pack Quantity: 1 Box = 100 Units
• Pricing: Price quoted per box

Applications

• Leg connections for large dining tables, work desks, and conference tables
• Thick timber square legs — 60×60 mm and 70×70 mm
• Heavy‑duty furniture, counter tops, and console units
• Furniture built from plywood, solid timber, and thick panels
• Mass‑produced furniture manufacturing
• Repairing loose large legs during renovation work
• Custom‑designed and large‑scale projects

Product Advantages

• L‑Shaped Corner Design: Outperforms flat and curved single‑plate models; connects in two directions at once, gripping the leg securely at the corner to eliminate wobble completely
• Spacious 77×77 mm Mounting Face: Seats fully on large square legs; load spreads evenly across the wide surface — no concentrated wear or risk of breakage at a single point
• 86 mm Extended Arm: Widely spaced screw points create a stronger connection and reduce the risk of loosening or separation over time
• 2 mm Gauge: Will not bend or warp even under heavy‑duty use; permanent deformation is prevented
• Zinc‑Plated Finish: Rust‑resistant and colour‑stable under normal indoor conditions; maintains a clean, professional appearance
• Simple Installation: L‑form naturally aids alignment; no special tools required — secure quickly with screws
• Higher Load Capacity: Dual‑arm construction supports greater weight than single‑plate flat brackets of the same thickness
• Value 100‑Pack: Box pricing structure lowers the per‑unit cost for high‑volume production and large projects

Installation Guidelines

• Prepare mating surfaces on the leg corner and table frame so they are flat, clean, and solid
• Fit the bracket over the leg corner using its L‑shape to align both arms, then mark the screw positions
• Select screws of a length appropriate to the material thickness
• Tighten screws gradually in a diagonal sequence; do not tighten from only one side
• Do not over‑tighten — material may split or the bracket may deform
• For high‑load points, use fixings from both sides where possible
• Use stainless‑steel screws in damp or humid environments
• Check screw tightness periodically; retighten gradually if any loosening appears

Frequently Asked Questions

How does this differ from other table brackets?
It has an L‑shaped dual‑arm structure; far stronger than single‑plate designs. Because it grips the leg at the corner from two directions, wobble and movement are completely eliminated.

Which leg sizes does it fit?
Designed specifically for large square legs — 60×60 mm, 70×70 mm, and 75×75 mm. Choose flat or curved brackets for smaller leg sizes.

Will it rust?
Zinc plating provides adequate protection for indoor use. The stainless‑steel version is recommended for areas constantly exposed to water or moisture.

Are mounting screws included?
No — the box contains only the brackets. Fixings must be purchased separately to match your material type.

How is pricing structured?
The listed price applies to one box of 100 units. Contact us for quantity pricing and detailed information.