Meridyen 3.5x35 Chipboard Screw, 1000 Pieces

Meridyen Chipboard Screw 3.5×35 mm — 1000 Pieces

Meridyen 3.5×35 mm Chipboard Screw is a fastener that delivers reliable connections in 12–18 mm thick chipboard, MDF, plywood, and solid wood, supplied in an economical box for mass production and professional work. Its 3.5 mm body diameter and 35 mm overall length offer ideal proportions for furniture assembly, interior decoration, cabinet making, and shelving. Manufactured to standard quality with a hardened carbon steel body, yellow zinc plating, and a Pozidriv (PZ2) star‑drive countersunk head. The large 1000‑piece pack provides stock and cost efficiency for continuous use.

Technical Specifications

• Brand: Meridyen
• Barcode: 8697448981415
• Product Code: MRDY.SV3535 / 1000610030
• Product Type: Chipboard Screw — DIN 7505
• Body Diameter: 3.5 mm
• Overall Length: 35 mm
• Head Type: Countersunk — Star / Pozidriv (PZ2)
• Thread Design: Deep, sharp thread — fast driving, high tensile strength
• Point Type: Sharp / Self‑feeding — easy entry without pre‑drilling
• Material: Hardened carbon steel
• Plating: Yellow zinc (galvanized) — corrosion resistant
• Pack: 1000 pieces / box
• Origin: Made in Türkiye

Application Areas

• Joining 12–18 mm thick chipboard, MDF, and plywood panels
• Assembling cabinet bodies, doors, plinths, shelves, and furniture units
• Manufacturing wooden frames, tables, seating, and occasional furniture
• Interior finishing, skirting, cladding, and panel fixing
• Timber framing, battening, underlay fixing, and partition wall work
• Installing wooden windows and door joinery
• Light‑to‑medium load fixing into walls using wall plugs
• Carpentry workshops, serial production, and work requiring steady stock

Product Advantages

• ✅ 35 mm length — ideal grip depth in standard‑thickness boards; will not break through the reverse side
• ✅ 3.5 mm body diameter — no material tearing; balanced connection, low breakage risk
• ✅ Sharp point + deep thread — drives into chipboard and softwood without pre‑drilling; saves time
• ✅ PZ2 star drive — bit does not slip; head will not strip; dependable torque transfer
• ✅ Countersunk head — sits flush with the surface; neat appearance, does not spoil finishes
• ✅ Yellow zinc plating — long life indoors; withstands limited outdoor exposure
• ✅ Box of 1000 — excellent unit price value for mass production and ongoing use

Application Guidelines

• Use a PZ2 (Star / Pozidriv) driver bit; Phillips or slotted bits will damage the head
• Drive at a true right angle to the surface; angled entry stresses the shank and may cause breakage
• Fastening depth should reach approx. 60–70 % of screw length; excessive penetration may split the material
• Pre‑drilling is recommended in solid hardwood or very dense MDF; reduces breakage risk
• Ease off torque near the end of the drive; stop once the head sits flush with the surface
• Select stainless steel screws for permanent exposure to rain, coastal air, or high humidity
• Store in dry, moisture‑free conditions; keep the box lid closed

Frequently Asked Questions

— Is pre‑drilling necessary?
Generally not required in chipboard, standard MDF, and softwoods; a pilot hole is recommended in solid hardwood or very dense material.

— Which driver bit is used?
PZ2 (Star / Pozidriv) standard‑size bit.

— Can these be used outdoors?
Zinc plating withstands limited exterior exposure; stainless steel is recommended for permanent outdoor or damp environments.