Meridyen 4,0x60 Chipboard Screw, Pack of 200

Meridyen Chipboard Screw 4.0×60 mm — 200 Pieces

Meridyen 4.0×60 mm Chipboard Screw is a fastener specially manufactured for joining thick panels, furniture assemblies requiring deep grip, and timber‑frame applications. Its 4.0 mm body diameter and 60 mm overall length create strong, dependable connections in a single pass through chipboard, MDF, plywood, and solid wood from 18 mm to 25 mm thick. Built to professional standards with a hardened carbon steel body, yellow zinc plating, and a PZ2 star‑drive countersunk head. Supplied in a practical pack of 200 — the ideal quantity for mid‑sized projects and ongoing stock use.

Technical Specifications

• Brand: Meridyen
• Barcode: 8697448981637
• Product Type: Chipboard / Wood Screw — DIN 7505
• Body Diameter: 4.0 mm
• Overall Length: 60 mm
• Head Type: Countersunk — Star / Pozidriv (PZ2)
• Thread Design: Deep, sharp thread — fast driving, high tensile strength
• Point Type: Sharp point — easy entry into soft materials without pre‑drilling
• Material: Hardened carbon steel
• Plating: Yellow zinc (galvanized) — corrosion resistant
• Pack: 200 pieces / box
• Origin: Made in Türkiye

Application Areas

• Joining 18–25 mm thick chipboard, MDF, and plywood panels
• Assembling double‑layer panels, thick boards, and partition walls
• Building cabinet bodies, plinths, table legs, shelves, and frames
• Solid wood furniture, door, and window joinery
• Fixing timber frames, sub‑flooring, and load‑bearing battens
• Interior decoration, skirting boards, and cladding panels
• Medium‑to‑heavy load fixing into walls using wall plugs
• Carpentry workshops, renovation, and serial production work

Product Advantages

• ✅ 60 mm length — deep grip in thick materials; reduces risk of loosening or pulling out
• ✅ 4.0 mm body diameter — ample strength without tearing the material; balanced, reliable connections
• ✅ Sharp point + deep thread — drives into chipboard and softwood with no pre‑drilling
• ✅ PZ2 star drive — zero bit slippage; head will not strip; secure torque transfer
• ✅ Countersunk head — sits flush for a neat finish; does not spoil surface coatings
• ✅ Yellow zinc plating — long service life indoors; withstands limited outdoor exposure
• ✅ 200‑piece pack — perfectly sized for mid‑scale projects; stock‑friendly and budget‑efficient

Application Guidelines

• Use a PZ2 (Star / Pozidriv) driver bit; Phillips or slotted bits will damage the head
• Drive at a true right angle to the surface; angled entry stresses the shank and may cause breakage
• Fastening depth should reach approx. 60–70 % of screw length; excessive penetration may split the material
• Pre‑drilling is recommended in solid hardwood or very dense MDF; reduces breakage risk
• Ease off torque as seating completes; stop once the head sits flush with the surface
• Select stainless steel screws for permanent exposure to rain, coastal air, or high humidity
• Store in dry, moisture‑free conditions; keep the box lid closed

Frequently Asked Questions

— Is pre‑drilling necessary?
Generally not required in chipboard, standard MDF, and softwoods; a pilot hole is recommended in solid hardwood or very dense material.

— Which driver bit is used?
PZ2 (Star / Pozidriv) standard‑size bit.

— Can these be used outdoors?
Zinc plating withstands limited exterior exposure; stainless steel is recommended for permanent outdoor or damp environments.