Meridyen Chipboard Screw 2,5X16 (36,000 Pieces)

Meridyen Chipboard Screw 2.5×16 mm — 36,000 Pieces

Meridyen 2.5×16 mm Chipboard Screw is a compact fastener manufactured for precision assembly in thin panels, furniture hardware, trim, and small‑scale joining work. With a thin 2.5 mm body diameter and short 16 mm length, it seats perfectly in 6–10 mm thick chipboard, MDF, and plywood without breaking through from the reverse side. Its sharp‑point design enables rapid driving with no pre‑drilling required. Supplied in a bulk pack of 36,000 — specially prepared for large‑scale production facilities, continuously operating workshops, and institutional supply requirements.

Technical Specifications

• Brand: Meridyen
• Barcode: 8697448981057
• Product Code: MRDY.SV2516
• Product Type: Chipboard Screw — DIN 7505
• Body Diameter: 2.5 mm
• Overall Length: 16 mm
• Head Type: Countersunk — Star / Pozidriv (PZ0)
• Thread Design: Fine, closely spaced thread — maximum grip in delicate materials
• Point Type: Sharp point — easy entry without pre‑drilling
• Material: Hardened carbon steel
• Plating: Zinc plated — corrosion and moisture resistant
• Pack: 36,000 pieces / bulk shipment
• Origin: Made in Türkiye

Application Areas

• Joining thin 6–10 mm chipboard, MDF, and plywood panels
• Assembling hinges, handles, locks, and small furniture hardware
• Securing trim, skirting boards, decorative strips, and thin veneers
• Manufacturing small wooden frames, cases, boxes, and packaging
• Fitting shelf supports, dividers, and lightweight fixtures inside cabinets
• Hobby, model‑making, and craft projects
• Electronic enclosures, wooden packaging, and minor repair work
• Production line assembly and institutional stock replenishment programs

Product Advantages

• ✅ Thin 2.5 mm body — passes through delicate, thin materials without splitting or cracking them
• ✅ Short 16 mm length — seats flush in thin panels; will not break through or create unnecessary holes
• ✅ Sharp point + fine thread — drives quickly into chipboard and MDF with no pre‑drilling
• ✅ PZ0 star drive — perfectly matched to small‑format bits; zero slippage, no head stripping
• ✅ Countersunk head — sits flush for a smooth, clean finish; no secondary finishing needed
• ✅ Zinc plating — long service life indoors; resistant to damp and humidity
• ✅ Bulk pack of 36,000 — uninterrupted supply for large‑scale manufacturing; maximum unit‑cost efficiency

Application Guidelines

• Use a PZ0 (Star / Pozidriv) small‑size driver bit; larger bits will damage the head
• Drive at a true right angle to the surface; angled entry reduces grip strength and may cause breakage
• Material thickness should be at least 2–3 mm greater than screw length; prevents breakthrough
• Pre‑drilling is recommended in solid hardwood; minimises breakage risk due to thin shank diameter
• Ease off torque as seating completes; avoids splitting thin stock or snapping the head
• Select stainless steel variants for permanent outdoor use
• Set speed and torque appropriately when using automated driving equipment in high‑volume production
• Store in dry, moisture‑free conditions; do not leave in damp environments for extended periods

Frequently Asked Questions

— Is pre‑drilling necessary?
Generally not required in chipboard, standard MDF, and softwoods; a pilot hole is recommended in solid hardwood or very dense material.

— Which driver bit is used?
PZ0 (Star / Pozidriv) small‑size bit.

— Can these be used outdoors?
Zinc plating withstands limited exterior exposure; stainless steel screws are recommended for permanent outdoor or damp environments.

— Are smaller pack sizes available?
This size is also offered in 100‑piece, 200‑piece, 500‑piece, and 1,000‑piece packs.