Meridyen Chipboard Screw 3.5x35 1000 Pieces

Meridyen Chipboard Screw 3.5×35 mm — 1000 Pieces

Meridyen 3.5×35 mm Chipboard Screw is a fastener that provides reliable connections in 12–18 mm thick chipboard, MDF, plywood, and solid wood, presented in an economical box suitable for mass production and professional work. With a 3.5 mm body diameter and 35 mm overall length, it has ideal proportions for furniture assembly, interior decoration, cabinet construction, and shelving. Manufactured to standard quality with a hardened carbon steel body, yellow zinc plating, and a star‑drive (PZ2) countersunk head design. The large 1000‑piece pack offers stock and cost‑per‑unit advantages for continuous use.

Technical Specifications

• Brand: Meridyen
• Barcode: 8697448981415
• Product Code: MRDY.SV3535
• Product Type: Chipboard Screw — DIN 7505
• Body Diameter: 3.5 mm
• Overall Length: 35 mm
• Head Type: Countersunk — Star / Pozidriv (PZ2)
• Thread Design: Deep, sharp thread — fast driving, high tensile strength
• Point Type: Sharp point — easy entry without pre‑drilling
• Material: Hardened carbon steel
• Plating: Yellow zinc (galvanized) — corrosion resistant
• Pack: 1000 pieces / box
• Origin: Made in Türkiye

Application Areas

• Joining 12–18 mm thick chipboard, MDF, and plywood panels
• Assembling cabinet bodies, doors, plinths, shelves, and furniture units
• Manufacturing wooden frames, tables, seating, and side tables
• Interior decoration, skirting boards, cladding, and panel fixing
• Timber framing, battening, sub‑floor fixing, and partition wall work
• Installing wooden window and door joinery
• Light‑to‑medium load fixing into walls using wall plugs
• Carpentry workshops, serial production, and work requiring steady stock

Product Advantages

• ✅ 35 mm length — ideal grip depth in standard‑thickness boards; does not pass through the material
• ✅ 3.5 mm body diameter — does not tear the material; balanced connection, low breakage risk
• ✅ Sharp point + deep thread — drives into chipboard and softwood without pre‑drilling; saves time
• ✅ PZ2 star drive — driver bit does not slip; head will not strip; reliable torque transfer
• ✅ Countersunk head — sits flush with the surface; neat appearance, does not damage surface finishes
• ✅ Yellow zinc plating — long service life indoors; resistant to limited outdoor exposure
• ✅ Box of 1000 — excellent unit price advantage for serial production and continuous use

Application Guidelines

• Use a PZ2 (Star / Pozidriv) driver bit; Phillips or slotted bits will damage the head
• Drive at a true right angle to the surface; angled entry places stress on the shank and may cause breakage
• Fastening depth should reach approximately 60–70 % of screw length; excessive penetration may split the material
• Pre‑drilling is recommended in solid hardwood or very dense MDF; reduces the risk of breakage
• Reduce torque as you near the end of tightening; stop once the head sits flush with the surface
• Select stainless steel screws for permanent exposure to rain, coastal air, or high‑humidity environments
• Store in dry, moisture‑free conditions; keep the box lid closed

Frequently Asked Questions

— Is pre‑drilling necessary?
Generally not required in chipboard, standard MDF, and softwoods; a pilot hole is recommended in solid hardwood or very dense material.

— Which driver bit is used?
PZ2 (Star / Pozidriv) standard‑size bit.

— Can these be used outdoors?
Zinc plating withstands short‑term outdoor exposure; stainless steel screws are recommended for permanent outdoor and damp environments.

— Are other size options available?
Options are available in different diameters and lengths within the same product line.

— Is the tip replaceable?
Designed so that it can be removed and replaced with a new one in the event of wear or damage.