Meridyen Wood Chipboard Screw 3.5x35 1000 Pieces

Meridyen Wood & Chipboard Screw 3.5×35 mm — 1000 Pieces

Meridyen 3.5×35 mm Wood & Chipboard Screw is a standard fastener manufactured for reliable joining of medium‑thickness panels, furniture components, and timber elements. Featuring a hardened carbon steel body and a sharp‑pointed deep‑thread design, it allows rapid installation without pre‑drilling; its 35 mm length provides sufficient grip depth for double‑layered connections. Supplied in a large pack of 1000 — an economical stock solution for workshops, serial production, and continuous use.

Technical Specifications

• Brand: Meridyen
• Product Type: Wood / Chipboard Screw
• Diameter: 3.5 mm
• Overall Length: 35 mm
• Head Type: Countersunk — Pozidriv (PZ1)
• Point Type: Sharp point — easy entry without pre‑drilling
• Thread Standard: DIN 7505
• Material: Hardened carbon steel
• Plating: Zinc plated — resists corrosion and moisture
• Pack: 1000 pieces / box
• Origin: Made in Türkiye

Application Areas

• Joining 12–20 mm thick chipboard, MDF, and plywood panels
• Double‑layer panel joints and main furniture frame assembly
• Constructing timber frames, cases, and structural frameworks
• Securing cabinets, tables, chairs, and shelving units
• Fixing skirting boards, cladding, and thick covering elements
• Fitting joinery, door, and window hardware
• General carpentry, renovation, and repair work

Product Advantages

• ✅ Balanced 3.5×35 mm size — full secure grip in medium‑thickness materials; neither too long nor too short
• ✅ Sharp point + deep thread — drives quickly into chipboard, MDF, and softwood without pre‑drilling
• ✅ Countersunk head — sits flush with the surface for a smooth, neat finish; no extra finishing needed
• ✅ PZ1 Pozidriv drive — prevents bit slippage; consistent torque transfer; head will not strip
• ✅ Zinc plating — long service life indoors; resistant to damp and humid conditions
• ✅ Bulk pack of 1000 — low unit cost; convenient steady supply for ongoing use
• ✅ Standard sizing — widely used; replacements and complementary parts are readily available

Application Guidelines

• Use a PZ1 Pozidriv driver bit; an ill‑fitting bit will damage the head
• Drive at a true right angle to the surface; angled entry reduces holding power and may cause breakage
• Ensure material thickness exceeds screw length by at least 3–5 mm to prevent breakthrough
• Drill a pilot hole in dense hardwood — recommended to reduce breakage risk and ease installation
• Reduce torque as the screw nears full seating; avoid splitting the surface or snapping the head
• Choose stainless steel variants for permanent outdoor exposure
• Store in dry, moisture‑free conditions; keep the lid sealed once opened

Frequently Asked Questions

— Is pre‑drilling necessary?
Generally not required in chipboard, MDF, and softwoods; a pilot hole is recommended in very hard or dense timber.

— Which driver bit is used?
PZ1 (Pozidriv / Star) bit.

— Can these be used outdoors?
Zinc plating withstands limited exterior exposure; stainless steel is recommended for permanent outdoor or damp environments.

— How many screws are included?
Each pack contains exactly 1000 screws.

— Are other pack sizes available?
The same dimensions are also available in packs of 100, 200, and 500.