Nail-In Shelf Pin Ø11 Mm (1000 Pieces)

Nail‑in Shelf Pins Ø11 mm – Box of 1000

These Ø11 mm nail‑in shelf pins are heavy‑duty fasteners designed to secure shelves safely in cabinets, wardrobes, kitchen and bathroom units during furniture manufacture. The 11 mm diameter is the preferred standard for thicker shelves and large cabinet systems that will carry substantial loads. The nail‑in design allows quick installation with a hammer — no screws or additional fixings required. Supplied in a bulk pack of 1000, they deliver excellent cost efficiency for high‑volume workshops and wholesale use.

Technical Specifications

• Type: Nail‑in Shelf Support Pin
• Shank Diameter: 11 mm
• Overall Length: Approx. 22–24 mm
• Nail End Diameter: Approx. 3 mm
• Material: Coated steel shank + robust plastic head
• Colour Options: White, Cream, Brown, Black, Oak
• Recommended Hole Diameter: 11 mm
• Load Capacity: Approx. 20–25 kg per pin (when used in pairs)
• Installation: Tap gently into place with a hammer
• Pack Quantity: 1000 per Box

Applications

• Large‑capacity cabinets and wardrobe systems
• Heavy‑duty units with thick shelves for substantial loads
• Kitchen cabinets and shelving for heavy cookware
• Office furniture, filing and archive storage
• Bookcases and heavy‑duty display units
• Retail shop fittings and merchandising systems
• Custom and made‑to‑measure furniture
• Replacement of broken or missing pins during refurbishment

Product Advantages

• Thick 11 mm Shank: Higher load rating than 8–9 mm pins; ideal for heavy‑use shelving
• Nail‑in Design: No screws, nuts or tools needed — fully installed in seconds
• Robust Metal Construction: Highly resistant to bending and breaking compared with all‑plastic alternatives
• Easily Removable & Adjustable: Pulls out cleanly; simply relocate to different holes to change shelf heights
• Decorative Colour Range: White, Cream, Brown, Black, Oak — matches furniture finishes neatly
• Protective Coating: Resists rust and discolouration; remains tight and secure for years
• Wide Support Shoulder: Prevents shelf creep or sliding; provides stable, balanced support
• Bulk Pack of 1000: Optimised stock supply and low unit cost for continuous production

Installation Guidelines

• Ensure holes in cabinet panels are drilled to exactly 11 mm; an oversize hole will not hold securely; an undersize hole may split the board
• Insert the pointed end into the hole and tap gently with a hammer; do not strike with excessive force
• Position one pin at each shelf corner, spaced evenly to distribute weight uniformly
• For heavy loads, increase pin quantity and specify this robust 11 mm version
• To remove, pull straight out gradually; avoid prying which can enlarge or distort the hole
• Store in dry conditions; continuous damp environments may shorten coating life

Frequently Asked Questions

What is the difference between 11 mm and 9 mm pins?
The 11 mm shank is thicker and rated for higher loads. Choose 11 mm for bookcases, heavy kitchen storage and large cabinets; 8–9 mm is sufficient for lighter domestic furniture.

Does the hole need to be exactly 11 mm?
11 mm is ideal for a secure fit. 10.5–11.5 mm will work, but the exact 11 mm drill size gives the tightest, most reliable seating.

Will the plastic head break?
The head is manufactured from impact‑resistant rigid plastic; the actual load is carried by the steel shank, so breakage risk is very low.

Are other colours available?
Yes — White, Cream, Brown, Black and Oak are in stock. Select the shade closest to your furniture finish.

Can heights be adjusted?
The pin itself is fixed length; move the pins to holes at the desired height to raise or lower the shelf.