Selectron 2.5x16 Chipboard Screw (1,000 Pieces)

Selectron 2.5×16 Chipboard Screw (1,000 Pieces)

The Selectron 2.5×16 mm Chipboard Screw is a standard slim‑diameter, short‑length fastener designed for joining wood, particleboard, MDF, and similar panels. With its short 16 mm length, it offers an ideal solution especially for thin panels, small furniture parts, fittings, and cover plug installation. The 1,000‑piece pack provides cost‑effectiveness and continuous stock availability for workshops, manufacturers, and suppliers.

Technical Specifications

• Brand: Selectron
• Type: Chipboard / Wood Screw
• Diameter: 2.5 mm
• Length: 16 mm
• Head Type: Countersunk Head
• Thread Style: Full Thread
• Point Style: Sharp point for easy entry
• Coating: Zinc plating / White passivation
• Material: Hardened Carbon Steel
• Packaging: 1,000 pieces per pack
• Origin: Turkey

Applications

• Joining particleboard, MDF, and wood panels of 16 mm or thinner
• Drawer fronts, drawer bases, and small connection points
• Assembly of plastic and metal fittings, cover plugs, and hinges
• Small furniture, shelves, side tables, and decorative items
• Wooden toys, crafts, and hobby projects
• Renovation, repair, and component replacement work
• School, workshop, and training environments
• Continuous serial production supply for manufacturing companies

Product Advantages

• 2.5 mm slim diameter — minimizes splitting and cracking risk in thin, delicate panels
• 16 mm short length — does not protrude through thinner materials, delivering a clean, neat appearance
• Countersunk head — sits perfectly flush with the surface; fully compatible with screw cover caps if concealment is required
• Full‑thread design — delivers strong holding power even in short lengths; resists loosening and pull‑out
• Sharp point — drives easily even without a pilot hole, reducing installation time
• Zinc coating — provides good rust and corrosion resistance under indoor conditions
• Hardened steel — high resistance to breakage and bending; screwdriver bit stays engaged without slipping
• 1,000‑piece pack — reduces unit cost and offers stocking benefits for frequently used sizes

Installation & Assembly Recommendations

• Pre‑drilling with a small‑diameter pilot hole is recommended for thin or hard materials; prevents panel splitting
• Drive the screw at a true right angle; angled entry reduces contact area and may break the screw
• Apply appropriate torque; over‑tightening will strip the head or snap the screw
• Ensure the head sits flush with the surface; excessive pressure weakens the material
• Fastening depth — select screw length so it penetrates at least two‑thirds into the receiving material
• Zinc coating is ideal for indoor use; choose stainless steel versions for damp environments and outdoor exposure
• Store in dry conditions; prolonged moisture exposure shortens coating life
• Check material thickness to avoid the point breaking through the opposite side

Frequently Asked Questions

Is pre‑drilling mandatory?
May not be required in softwood; drilling a fine pilot hole is recommended in hardwood, high‑density MDF, and particleboard to prevent splitting and cracking.

Suitable for metal?
No — this screw is designed exclusively for wood and fibre‑based panels; use appropriate fasteners for metal connections.

What is the difference vs the 2.5×18 version?
This model is 16 mm long and engineered for thinner materials; the 18 mm variant is intended for slightly thicker stock.

Is a stainless steel version available?
Yes — stainless steel variants are available for outdoor use, bathrooms, kitchens, and other damp environments.

Which drive type does it use?
Compatible with standard Phillips (cross‑head) or flat‑head screwdriver bits; bits are not included in the pack.