Selsil Sellock 3638 Very High Heat Resistance Sealant 50 ML (12 Pieces)

SELLOCK 3638 VERY HIGH HEAT RESISTANCE CLAMPING 50 ML

Sellock 3638 Very High Thermal Resistance Clamper Ideal for filling gaps with a diameter of 0.25 mm (0.01") where maximum strength is required at room temperature. Suitable for locking seats and bushings on shafts and housings. It has excellent holding, sealing and bolt fixing properties. Area of ​​Application and Use For best results in installation, clean all surfaces (inside and outside) with a cleaning solvent and allow to dry. If the material is an inactive metal or the drying rate is slow, use an activator. For slip fit, apply adhesive in a circular pattern along the leading edge of the pin and the inside of the collar to ensure good coverage. For press fit, apply the adhesive completely to both bonding surfaces and assemble by pressing at high speed. For hot fit, coat the pin with adhesive, then heat until the collar creates the necessary clearance for free assembly. For disassembly, apply localized heat up to 250 °C. Disassemble the part while it is hot.

• NOTE: Price is for 1 box.
• Box Quantity: 12 Pieces SELLOCK 3638 VERY HIGH HEAT RESISTANCE CLAMPERS 50 ML