Sheet Metal Corner Brace 10-Piece, 1.5x13x100x100 mm (100 Pieces)

No. 10 Steel Corner Brace – 1.5 × 13 × 100 × 100 mm, Box of 100

No. 10 Steel Corner Braces are heavy‑duty reinforcement brackets designed for medium‑to‑large corner joints requiring a broad grip area. With a 1.5 mm thickness, 13 mm width, and equal 100 × 100 mm arm lengths, they distribute force evenly across wide surfaces — the trusted choice for heavy‑duty furniture, substantial frames, and timber construction. The 90° right‑angle profile suits large cabinet bodies, sturdy table frames, and load‑bearing frame connections. Supplied in boxes of 100, they offer cost‑effective stock for workshops and mass‑production.

Technical Specifications

• Type: No. 10 Steel Corner Brace — Large‑Size Corner Connection Bracket
• Thickness: 1.5 mm
• Width: 13 mm
• Arm Size: 100 mm × 100 mm (equal‑sided)
• Material: High‑Quality Metal Alloy
• Finish: Zinc‑Plated — Corrosion & Rust‑Resistant
• Hole Diameter: Approx. 4–5 mm (standard screw fit)
• Number of Holes: 4 — 2 per arm
• Angle: 90° standard right angle
• Colour: Silver / Zinc
• Pack Quantity: 100 per Box

Applications

• Corner joints for large furniture carcasses and heavy‑duty cabinet bodies
• Primary corner reinforcement for wardrobes, wide shelving, and storage units
• Frame connections for substantial tables, workbenches, and seating groups
• Large‑scale corner points in timber frames, doors, and joinery
• Corner joints on broad surfaces in plywood, solid timber, and thick panels
• Corners for interior partition walls and load‑bearing support systems
• Repair of weakened large‑scale corners during renovation
• Mass‑production and large‑scale projects

Product Advantages

• Generous 100 × 100 mm Size: Noticeably broader grip area than No. 6 and No. 8 models; spreads force across a large surface and minimises the risk of material splitting
• Slim 13 mm Width: Despite long arms, the thin profile sits flush without protruding; remains neatly concealed behind doors and drawers
• 1.5 mm Thickness: Reliable rigidity for medium‑duty use; will not bend, warp, or permanently deform
• Four‑Point Security: Two fixing points per arm; rotation, slip, and loosening over time are minimised — the joint stays secure for years
• Zinc‑Plated Finish: Rust‑resistant indoors; no discolouration, maintains a clean, professional appearance
• Precision 90° Angle: Factory‑set angle; no on‑site adjustment needed — corners form perfectly square
• Simple Installation: No special tools; pre‑aligned holes ready for direct fitting
• Economical 100‑Pack: Ideal quantity for high‑volume workshops; low unit cost keeps project expenses down

Installation Guidelines

• Ensure corner surfaces are flat, clean, and perfectly square to one another
• Mark the brace position; verify both arms sit flush and evenly
• Select suitable fasteners: use wood screws with 5 mm head diameter; choose adequate length to match the long arms
• Tighten progressively in a crossing pattern; do not fully tighten until all screws are seated
• Avoid over‑tightening — material may split or the brace may distort
• For heavy loads, install symmetrically on both sides; single‑sided fitting creates imbalance
• Use stainless‑steel screws in damp locations such as kitchens and bathrooms
• Loosen screws gradually in a cross pattern during disassembly; do not force the joint apart

Frequently Asked Questions

How does this differ from No. 6 and No. 8?
No. 6 measures 60 × 60 mm, No. 8 is 80 × 80 mm; No. 10 at 100 × 100 mm is the largest standard steel brace. It offers the widest grip area and highest load capacity — the first choice for large, heavy structures.

What weight can it support?
The 1.5 mm thickness means 2 mm or heavier‑gauge models are recommended for sustained heavy loads; however, the broad surface gives higher capacity than smaller braces of the same thickness.

Will it rust?
Zinc plating provides adequate protection for indoor use. For exterior or persistently damp environments, the stainless‑steel version is recommended.

Are other sizes available?
Yes — options include 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 70 × 70 mm, 80 × 80 mm, and 120 × 120 mm.

Are screws included?
No — braces only. Purchase fixings separately, matched to your material type.