Swivel Head Stainless Bingo Foot M10 Ø32 Inox (1500 Pieces)

Stainless Steel Swivel-Head Levelling Foot — M10 × Ø32 mm, Bright Inox (1,500 Pieces)

Stainless Steel Swivel-Head Levelling Foot M10 × Ø32 mm Inox is a heavy‑duty furniture support leg with a hinged, self‑aligning head that delivers perfect stability on uneven floors. The broad 32 mm base sits securely on the ground, while the robust M10 threaded stud provides high load‑bearing capacity. Manufactured entirely from stainless steel (Inox), it offers exceptional resistance to rust, corrosion, and oxidation — making it especially ideal for damp, humid, or wet environments. Supplied in a bulk carton of 1,500 pieces, it provides the perfect stock solution for high‑volume workshops, project contractors, and wholesale suppliers.

Technical Specifications

• Product Type: Swivel‑Head (Hinged) Stainless Steel Levelling Foot
• Connection: M10 Male Threaded Stud
• Base Diameter: Ø32 mm
• Overall Height: Approx. 35 mm (including thread)
• Adjustment Range: Approx. 15–20 mm via thread length
• Material: Stainless steel (Inox) body; high‑quality plastic base pad
• Surface Finish: Polished bright stainless steel
• Colour: Silver / Metallic Inox
• Swivel Action: Self‑aligning head tilts ±8–10° to automatically compensate for floor slope
• Pack: 250 pieces per bag / 1,500 pieces per carton
• Carton Weight: Approx. 30 kg
• Origin: Made in Türkiye

Application Areas

• Kitchen worktop and plinth supports — ideal where a stainless‑steel aesthetic is required
• Bathroom cabinets, vanity units, and wet‑area furniture — fully resistant to moisture and water
• Heavy cabinets, wardrobes, and storage units — high load capacity via M10 thread
• Office furniture, filing cabinets, and workbench installations
• Hotels, restaurants, hospitals, and commercial projects — long life in frequently cleaned areas
• Commercial kitchens and stainless‑steel worktop systems
• Any location with sloping, uneven, or undulating floors — eliminates wobble via self‑alignment
• Refurbishment and renovation — direct replacement for existing M10 installations

Product Advantages

• ✅ Self‑aligning swivel head — unlike fixed feet, automatically adapts to floor slope; weight distributes evenly with no rocking
• ✅ True stainless‑steel construction — vastly superior to chrome‑plated alternatives; stands up to humidity, water, steam, and cleaning chemicals without rusting
• ✅ Heavy‑duty M10 thread — significantly stronger than M6/M8; safely supports substantial cabinets and worktops
• ✅ Wide Ø32 mm base — spreads load over a larger contact area; won’t dent soft flooring; high slip resistance
• ✅ Straightforward installation — screws directly into standard M10 female plates; no special tools; fully removable and reusable
• ✅ Premium appearance — polished Inox finish matches stainless‑steel furniture, appliances, and work surfaces seamlessly
• ✅ Bulk‑supply value — 1,500‑piece carton delivers excellent unit pricing; optimised for continuous production lines
• ✅ Fully interchangeable — compatible with all industry‑standard M10 mounting plates and fittings

Installation & Usage Guidelines

• Secure the M10 threaded plate flush to the furniture base; tighten screws evenly in a cross pattern to prevent tilt
• Thread the foot on gently — do not over‑tighten, as this may damage threads or lock the swivel mechanism
• Check stability after placement — the head will seat itself naturally; fine‑tune height by rotating the foot if needed
• Distribute weight — add intermediate feet under heavy spans; avoid placing excessive load on a single support
• Confirm compatibility — M10 will not fit M8 systems; verify existing plate specification before replacement
• Clean with a soft damp cloth only — avoid abrasive scouring pads, chlorine‑based products, or wire brushes that will scratch the surface
• Periodic inspection — recheck tightness at appropriate intervals in high‑usage or vibration‑prone environments
• Prolonged damp exposure — wipe dry to prevent standing water; regular drying maximises service life

Frequently Asked Questions

— Are mounting plates included?
No; plates are supplied separately — use standard M10 female threaded inserts.

— Can I replace M8 feet with these?
No — M10 is a larger diameter; requires matching M10 plates and will not fit M8 recesses.

— How much height adjustment is available?
Approx. 15–20 mm via the threaded stud; the swivel head provides angular compensation.

— What is the load rating?
Approx. 80–100 kg per foot under even distribution; add extra supports for exceptionally heavy installations.

— Are alternative finishes available?
Yes — Black, White, and Satin stainless‑steel versions can be supplied on request.