Wooden Dowel Rod (10 MM) 25 Kg

Beech Wood Dowel Rod 10 mm – 25 kg Pack

The 10 mm Wood Dowel Rod is a long, solid timber fastener used for alignment, joining, and reinforcement in furniture manufacturing, joinery, and structural woodwork. Supplied in mixed lengths from 100 cm to 125 cm, its continuous rod form delivers consistent alignment and structural strength along the full length of large timber sections. The 25 kg bulk pack offers an economical, practical supply solution for high‑volume workshops and large‑scale projects.

Technical Specifications

• Diameter: 10 mm
• Lengths: Mixed lengths from 100 cm to 125 cm
• Material: Hardwood (European Beech)
• Surface: Smooth / Fluted options – enhances adhesive absorption and bond strength
• Pieces per kg: Approx. 16–19 rods/kg
• Pack: 1 Bale = 25 kg
• Total Quantity: Approx. 400–475 rods per 25 kg pack
• Pricing: Price per 25 kg bale

Applications

• Large furniture frames and worktops
• Timber beams, posts, and structural load‑bearing components
• Wooden staircases, balustrades, and handrails
• Window, door, and joinery manufacturing
• Panel and board assembly
• High‑volume furniture production facilities
• Mass housing and timber‑frame construction projects

Product Advantages

• Standard 10 mm Diameter: The most widely specified industry size; fits directly into 10 mm drilled holes with no additional sizing or adjustment required
• Continuous Long‑Rod Design: Enables alignment and joining over far greater distances than short dowels; load is distributed evenly along the full connection length
• Convenient Mixed‑Length Pack: Rods from 100 cm to 125 cm provide flexibility for different component sizes without ordering separate lengths for every job
• High Structural Strength: Manufactured from beech for exceptional resistance to breakage, bending, and warping; remains rigid and does not loosen over time
• Superior Adhesion: Natural timber grain forms a strong bond with wood glue; once cured, the assembly behaves as a single solid piece
• Cost‑Effective 25 kg Bale: Approx. 400+ long rods per pack; significantly reduces unit cost and ensures uninterrupted stock for continuous production
• Volume Discounts Available: Additional price reductions apply for larger orders; budget‑friendly sourcing for major facilities and ongoing projects

Installation Guidelines

• Set drill diameter to exactly 10 mm; use sharp bits to ensure clean, precise holes
• Drill holes to a minimum depth of 70 % of the rod length for maximum grip
• Apply quality wood glue evenly to both the hole interior and the rod surface
• Insert the rod using light hammer taps or a press; do not force — excessive pressure may cause splitting
• Cut longer rods to suit shorter applications as needed; offcuts can be reused for smaller joinery work
• Clamp or support the assembly fully until adhesive has cured to prevent misalignment
• Store in a dry, shaded environment; sustained moisture or direct sunlight may cause warping or dimensional change

Frequently Asked Questions

Why are lengths mixed?
Natural variation occurs during standard‑length cutting; mixed packs cover multiple length requirements in a single delivery.

How many rods per kilogram?
Average 16–19 rods/kg; exact count varies slightly due to length differences.

Total quantity in a 25 kg pack?
Typically 400–475 rods; precise figure depends on the length distribution within the bale.

Can I order a single fixed length?
Standard supply is mixed lengths; contact us in advance if you require a specific uniform length.

Do you offer bulk discounts?
Yes, preferential pricing applies to larger orders — get in touch for a custom quotation.