Zinc Table Joining Pin (5000 Pieces)

Zinc-Plated Table Alignment Dowel Pins — (5,000 Pieces)

Zinc-Plated Table Joint Dowel Pins are high-precision fasteners designed to align, seat perfectly, and rigidly join two or more table tops, worktops, panels, or furniture sections into a single solid unit. The zinc-plated body delivers outstanding resistance to rust and wear, maintaining factory-fresh accuracy even through repeated disassembly and reassembly over years of use. Supplied in an industrial bulk pack of 5,000 — ensuring uninterrupted stock availability and exceptional unit-cost efficiency for furniture factories, high-volume workshops, and large-scale projects.

Technical Specifications

• Product Type: Table / Panel Alignment Dowel Pin
• Material: Hardened steel
• Coating: Zinc (electro-galvanised)
• Form: Cylindrical, tapered lead-in end, interference-fit mid-section
• Standard Sizes: 8×30 mm / 8×35 mm / 10×30 mm / 10×40 mm — selectable
• Surface: Smooth, burr-free, precision machined
• Pack: 5,000 pieces per carton
• Origin: Made in Türkiye

Application Areas

• Joining modular tables, worktops, and workbenches
• Connecting leaves and bases for dining, office, and conference tables
• Jointing timber, MDF, particleboard, and plywood panels
• Aligning built-in cabinets, shelving, and partition systems
• Furniture projects for residential complexes, hotels, business centres, and public institutions
• Continuous supply for serial production furniture manufacturers
• Re‑alignment of products shipped in flat‑pack form
• Replacing worn or damaged pins during renovation and refurbishment

Product Advantages

• ✅ Zinc coating — highly rust‑resistant against damp, humidity, and cement dust; retains a clean bright finish
• ✅ Hardened steel — will not bend, break, or work loose; no play or wobble within the hole
• ✅ Tapered entry — guides smoothly into the hole during fitting and compensates for minor alignment error
• ✅ Precision tolerance — delivers millimetre‑perfect fit between components; completely eliminates stepped misalignment
• ✅ Standard hole diameters — matches widely used 8 mm and 10 mm drill bits directly; no special tooling required
• ✅ Reusable — suffers no wear on removal; refits with the same original accuracy
• ✅ High‑volume pack — ensures continuous stock for large producers and lowers packaging and shipping costs per unit
• ✅ Quality‑cost efficiency — rapid local supply and after‑sales support vs imported alternatives

Installation & Usage Guidelines

• Drill the hole to match the pin diameter exactly — use an 8 mm bit for 8 mm pins and a 10 mm bit for 10 mm pins
• Drill the hole at least 2–3 mm deeper than the pin length to prevent binding when fully seated
• Mark hole centres in perfect symmetry between mating parts; offset holes cause jamming or breakage
• Tap gently into place with a hammer — use light, controlled blows rather than heavy strikes to protect the tip
• Do not use adhesive — the pin provides alignment and location; secure the joint with screws or locking fasteners
• Remove in straight axial direction only — pulling at an angle damages the pin and enlarges the hole
• Store in dry conditions for long‑term stock; do not leave exposed to constant damp
• Maintain tight hole tolerances when used in non‑timber materials — loose fit renders the pin ineffective

Frequently Asked Questions

— Which sizes are available?
The most common are 8×30 mm and 10×35 mm; a full range of diameters and lengths is stocked — select to suit your panel thickness.

— Can they be used in materials other than wood?
Perform reliably in MDF, particleboard, plywood, and non‑ferrous metal sections; precise hole tolerance is critical when drilling into hard materials.

— Will zinc plating rust?
Remains rust‑free under normal indoor conditions; choose the stainless‑steel version for outdoor or permanently wet environments.